PCM1865-Q1 TDM mode info missing in Datasheet

Chakravarthy Anbazhagan

Prodigy 60 points

Does the device support this mode (as listed in the device specifications)?

Why the details and timing info are missing in the datasheet even after such a longtime since the product release?

Any in TI aware of these issues?

over 9 years ago

0 Justin Bohr over 9 years ago

TI__Mastermind 27850 points

Hi Chakravarthy,

Yes the PCM186X series does support TDM mode. We are working to add this information to the data sheet and appreciate that you have let us know about your troubles. We will release an updated version of the data sheet as soon as we can.

Justin

0 Chris Burrell over 8 years ago in reply to Justin Bohr

Prodigy 95 points

Just a little (~7 month on) nudge to remind all that the data sheet is still the same as it was.. it would be really handy to have this information!

0 Dafydd Roche over 8 years ago in reply to Chris Burrell

TI__Expert 5555 points

Chris,

thank you for your patience. Both the datasheet and the GUI are undergoing rework to improve quality, content and examples.

The datasheet will go into internal review in the next week or so I believe, then go through to release.

Thanks again

Dafydd

0 Chris Burrell over 8 years ago in reply to Dafydd Roche

Prodigy 95 points

Dafydd,

Thank you for your fast response. I am sure there will be lots of people interested in these ADCs.

Audio

Audio forum

PCM1865-Q1 TDM mode info missing in Datasheet