Hi,
My design is a NAB/IEC pre-amplifier and wants to know weather I should use copper pour on the PCB. Is it OK to tie the copper pour to the analog ground on both sides?
Thanks in advance.
HK
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
My design is a NAB/IEC pre-amplifier and wants to know weather I should use copper pour on the PCB. Is it OK to tie the copper pour to the analog ground on both sides?
Thanks in advance.
HK