This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TPA3110D2-Q1: Maximum propagation delay

Intellectual 2590 points

Replies: 1

Views: 468

Part Number: TPA3110D2-Q1

Hello Audio Team,

Would you please tell me the estimated maximum propagation delay between the input and the output of TPA3110D2-Q1?

Best regards,
DY

  • Hi DY,
    The propagation delay from the device itself is very short, which can be ignored. The most delay for the whole application is from the output LC filter. So the total delay also depends on the inductance and capacitance in the LC filter, and it may change with the input frequency. But usually the delay is on us level, which is very tiny comparing to the audio signal. I think you don't need to worry about the propagation delay in this application.
    Best regards,
    Shawn Zheng

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.