• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 267 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5711: Can I use 4 Ω laod from a 12V supply?

user4215035
Intellectual 620 points
Part Number: TAS5711

Hi,

      I use TAS5711, i want to use 4 Ω laod from a 12V supply. But in datasheet i can't find the relevant information.

BTW, i find a problem in the datasheet: It is also 12V supply why the Output Power of Figure 24 and Figure 34 is different?.

   

  • 0
    TI__Guru 61360 points
    Hello,

    Which "relevant information" are you looking for?

    The difference between figure 24 and 34 is that one is SE mode and the other is PBTL mode. SE mode (single-ended) provides more outputs at lower power while PBTL provides only one output at higher power.

    Regards,

    -Adam