• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 569 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2557: Asking for the TAS2557 sampling rate support

SHH
Mastermind 32566 points

Part Number: TAS2557

HI Team,
Customer would like to use TAS2557 to support 96k sampling rate. TAS2557 datashhet describe that TAS2557 can support the sampling rate from 8k~96k.
How do customer can do to set TAS2557 at 96k sampling rate? Any trade off?


BR,
SHH

  • 0
    TI__Mastermind 20085 points
    Hi SHH,

    I could provide you a document where it is explained how to configure the TAS2557 with a different sampling rate, but TAS2557 accepts input audio data rates from 8 kHz to 96 kHz using ROM modes. When the speaker protection system is running the maximum sampling rate is limited to 48 kHz.
    Which operation mode will the customer use?

    Best Regards
    Jose Luis Figueroa
    Audio Applications Engineer
  • 0
    TI__Mastermind 20085 points
    Hi SHH,

    I haven't heard back from you. I am assuming that this answers your question. If not, create a new post with your doubts as this could have been locked due to time-out.

    Best Regards
    José Luis Figueroa
    Audio Applications Engineer