This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/TLV320AIC3204: CC8530 Headset DK devolopemnt kit(mic input one master,sound sent to three slave board )

Part Number: TLV320AIC3204
Other Parts Discussed in Thread: CC8530,

Tool/software: WEBENCH® Design Tools

Hi

our project is that set one board master(mic input,I2S to CC8530), set three boards slave(CC8530 to output headphone ),it works well,clear listens,

but i have one question,i want master board can listen MIC sound,too,PurePath wireless Commander can't find out parameter,i don't know how to set to TLV320AIC3204

Wish your reply!

  

Charlin

  • Hi, Charlin,

    Welcome to E2E, thanks for your interest in our products!.

    I am not familiar with PurePath wireless commander interface, but from the codec point of view, it is possible to capture audio from a mic connected to the Input Jack as long as the codec enables Micbias to power On the mic. For this, you need to configure the codec's internal registers to power micbias ON and set the input PGA gain to adjust the mic signal to a proper level.

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer