Hi,
According to TAS5825M data sheet, GPIO0 is off(low) if setting GPIO0_SEL[3:0] of 0x61 to 0000.
So, could you please tell me the value for the internal pull-down resistor which is connected to GPIO0 pin ?
Best regards,
Kato
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
According to TAS5825M data sheet, GPIO0 is off(low) if setting GPIO0_SEL[3:0] of 0x61 to 0000.
So, could you please tell me the value for the internal pull-down resistor which is connected to GPIO0 pin ?
Best regards,
Kato
Hi Matthew-san,
Thank you for your quick response.
I understood.
Best regards,
Kato