This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

PCM5102A: The behavior of PCM5102A clk error recovery

Expert 3370 points

Replies: 3

Views: 154

Part Number: PCM5102A

Hello Professional,

My customer has question for The behavior of PCM5102A clk error recovery.

His understanding is PCM5102A become STANDBYMODE when detect CLK error by I2S input floting(open). After then, PCM5102 will become normally operation when detect I2S input.

Is this understanding correct?

Best regards,

Kazuki Kuramochi 

  • Hi Kuramochi-san,

    Yes, please refer to the following mention.

    In addition, please refer to the following link regarding the noise issue when resuming the normal operation.

    PCM5102: Pop Noise when Pause and Play Music in Android Music Player
    http://e2e-ti-com.telligentsaas.net/support/audio/f/6/t/765759

    Best regards,
    Kato

  • In reply to Sadanori Kato:

    Hi Kuramochi-san,

    Kato-san is correct, the device will enter standby after a clock error as you have described.

    Thanks,
    Paul
  • In reply to Paul_Frost:

    Hi Kato-san, Paul-san,

    Thank you for your prompt reply.
    I understood.

    Best regards,
    Kazuki Kuramochi

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.