PCM5142: About the loudness in the GDE

aggil liang

Expert 2660 points

Part Number: PCM5142

is that right about the below flow path ?

Is there any way to pass or bypass the loudness compoment for the end customer select ?

over 4 years ago

0 Paul_Frost over 4 years ago

TI__Guru 52663 points

Hi Aggil,

The Loudness block can just be removed if the customer does not want that feature. Though note, the loudness blocks should be placed before the volume block, not after it.

Thanks,

Paul

0 aggil liang over 4 years ago in reply to Paul_Frost

Expert 2660 points

Hi Paul

Can we use one of the follow way to get our requirement ?

0 Paul_Frost over 4 years ago in reply to aggil liang

TI__Guru 52663 points

Hi Aggil,

I believe either one of these functions will work, though I recommend that you test the one you want to use to make sure the output is as desired.

Thanks,
Paul

Audio

Audio forum

PCM5142: About the loudness in the GDE