This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TAS5805M
I need the PBTL mono 1.0 configuration /header files.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Andy Liu (BMS):
In reply to Karthik nagendran:
In reply to Xiaolin Qin:
My Configuration is PBTL Mono 1.0.
I am using the header file generated from TI Reference "stereo_flow2_48kHz_default_coldboot_-10dB" for Linux version.
and I tried both the ways like manual configuration of the resistors using I2C commands below and through the Header files posted in the forum.
speaker-test -D hw:0,2 -t sine -r 48000 -c 2 -F S32_LE -S 5 &> /dev/null &
i2cget -f -y 0 0x2c 0x54
i2cget -f -y 0 0x2c 0x4c
i2cget -f -y 0 0x2c 0x37
i2cget -f -y 0 0x2c 0x68
i2cget -f -y 0 0x2c 0x69
i2cget -f -y 0 0x2c 0x6d
i2cget -f -y 0 0x2c 0x70
i2cget -f -y 0 0x2c 0x71
i2cget -f -y 0 0x2c 0x72
i2cget -f -y 0 0x2c 0x73
i2cget -f -y 0 0x2c 0x75
i2cget -f -y 0 0x2c 0x03
i2cget -f -y 0 0x2c 0x50
working boards had this values in I2C Read using the same configuration file:
54 = 0x00
4c = 0x30
37 = 0x09
68 = 0x03 // State Registers
69 = 0x03
6d = 0x50
70 = 0x00
71 = 0x01 / 0x05
72 = 0x00
73 = 0x00
75 = 0x38
but only few boards work this way and most of them are giving faulty register values. we suspect the header files may corrupt the configuration of chip.
I ordered the eval boards but need to check these setting to make sure I am running the correct header files into the chip.
and I don't have the PBTL Mono 1.0 header files to check if these issues are happening due to configuration files.
if you have a solution please let us know or give us the configuration files for PBTL mode that would be great.
In reply to karthik kumar nagendran:
The header you used is for stereo configurations. You need a different header file for Momo mode.
Try this one below, which I generated in the PPC3. I chose the PBTL/Mono speaker type before I generated it.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.