• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 353 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5805M: TAS5805M PPC3 Equalizer setting

Ryoji Itoh
Prodigy 710 points
Part Number: TAS5805M

Hello 

 My customer is trying to set equalizer with PPC3. 

Can you explain how to set equalizer with following condition?

1. Application= PPC3  EVM = TAS5805M

2. Speaker config Stereo 2.2  ( Tweeter　x　2 + Woofer x2 )

3. Audio signal is sync from PC to SDIN1.

Customer is expecting 

A-> B sync tuning :  This condition is  setting EQ for SDIN1 AMP.

B-> A sync tuning : This condition is setting EQ for SDIN2 AMP.

but post amp did not change the EQ setting. 

Please explain hat how to set EQ for post amp. 

Regards,

  • 0
    TI__Guru 52115 points

    I just took a quick look.  The Sync Tuning Data feature works well.  Basically, the purpose of this feature is to copy over the tuning settings from one device to another device quickly.  Could you have your customer double check? If they still see the same issue, could you ask them to provide more detials, like how to duplicate the issue step by step? Screeenshots would be helpful. Thanks.