This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Replies: 4
Views: 121
Part Number: TPA3245
Hi,
Our customers want to use multiple TPA3245s mounted by one on one board in an application that requires multi-channel amplifiers.He plans two clock signals OSC_IOP and OSC_IOM will be connected between each boards. Which of the following (A) to (C) cable is the best to connect clock signals between boards?
(A) shielded two clock signals together.(B) shielded twisted pair cable.(C) cables shielded one by one.
Best regards,
Akio Ito
Hi Akio,
Is the OSC_IOP and OSC_IOM the same signal that need to be connected together between the 2 boards? Or they are separated traces comes from a 3rd board?
Could you draw a simplified diagram to show your case?
Regards,
Hao
In reply to Sam(MPAA) Zhang:
Hello, Hao-san,
Thank you for your reply. Our customer's planning configuration seems to be same as shown in Figure 2 of the Application Report SLAA787.
In reply to Akio Ito:
I see. In these cables are signals related to clock. I would suggest to select "(B) shielded twisted pair cable".
Thanks!
Hao-san,
Thank you for your suggestion.