This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TLV320ADC5140
We are interfacing the IC TLV320ADC5140IRTWR to the AHD cameras, where the analog cameras sends audio data to this audio codec IC.
Does this Codec support G.711 u law format? or how this format can be implemented using this codec.
The audio codec will be interfaced to iMX8 Quad plus processor via I2S interface. NXP has confirmed it will support G.711 u law audio codec foramt.
The TLV320ADC5140 does not feature any hardware or DSP enabled u-Law/A-Law formatting schemes and this is typically handled by the host processor in the application which will communicate with the ADC5140 over I2S or TDM and then perform the encoding/decoding between the incoming Audio data and the outgoing uplink audio signals.
Regards,Collin WellsPrecision ADC Applications
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.