This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TAS5411-Q1: THD+N vs power in 5V & 8.4V PVDD application

Expert 3755 points

Replies: 1

Views: 34

Part Number: TAS5411-Q1

Dear team,

Could you share THD+N vs power data in 5V & 8.4V PVDD application with me?

I only found this data for 14.4V supply voltage( figure 4 in datasheet).

Here is my mail address and we can discuss this application offline. thanks

benkuo@ti.com 

Regards,

Ben

  • Ben,

    As it is typically used for car battery power supply condition, so datasheet use 14.4V for plots.

    If need 5V and 8.4V test data, apply for an EVM and go ahead test may be easiest way.

    Dylan

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.