This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM5100: About the output low pass filter on PCM5100 DAC

Part Number: PCM5100


The suggested LPF on the PCM5100 DAC output is 470E and 2.2nF that gives a cut-off frequency of around 154KHz.

For the purpose of minimizing the unique parts in my BOM, I would like to use 316E and 3.3nF that would have a cut-off of around 153KHz.

I would like to know if the modification are ok to do or would it affect the performance adversely.


With regards,