• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 228 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPA2012D2: Input bias voltage in shut down mode

A.Sakai
Prodigy 120 points
Part Number: TPA2012D2

Hi all,

I have a quick question for TPA2012.

Input bias voltage of TPA2012 is 0V in shut down mode? (input bias circuit is not active in shut down mode?)

Best regards,

  • 0
    TI__Guru* 84915 points
    Hi, A. Sakai,

    During the shutdown mode, the channels are completely powered off, leaving only the BIAS Circuitry portion active to enable or disable the channels through the SDR and SDL pins. The rest of input and output voltages are powered off.

    Best regards,
    Luis Fernando Rodríguez S.