This is a follow-up to a previous post with the same title but was locked so I couldn't do a follow-up.
I re-laid out the power amplifier section to better match the EVAL module layout and my problem is now solved .
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
This is a follow-up to a previous post with the same title but was locked so I couldn't do a follow-up.
I re-laid out the power amplifier section to better match the EVAL module layout and my problem is now solved .
Hi Richard,
Thank you for following up with us. And congratulations on getting your board to work!
Best Regards,
Robert Clifton