This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK04805: need help to check CLKout closed loop jitter spec using a commercial quality VCXO in offset=10Hz to 1KHz

Part Number: LMK04805

Dear TI engineer:

Please help to check CLKout closed loop jitter spec using a commercial quality VCXO in offset=10Hz to 1KHz.

The datasheet only show the parameter of offset=1KHz,10KHz, 100KHz, 800KHz and 1MHz, but end customer need the parameter of offset=10Hz to 1KHz.

Thanks!