This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

CDCE813-Q1: programmed by using the TI Pro-Clock™ software

Guru 25795 points

Replies: 1

Views: 475

Part Number: CDCE813-Q1

Hi Team,

The datasheet page 15 shows the following.
----------------------------------------------------
9.6.1 I2C Configuration Registers
The clock input, control pins, PLLs, and output stages are user configurable. The following tables and
explanations describe the programmable functions of the CDCE813-Q1 device. All settings can be manually
written into the device through the I2C bus or easily programmed by using the TI Pro-Clock™ software. TI Pro-
Clock™ software allows the user to make all settings quickly, and automatically calculates the values for
optimized performance at lowest jitter.
----------------------------------------------------
However it seems TI Pro-Clock™ doesn't support CDCE813-Q1.
http://www.ti.com/tool/CLOCKPRO?keyMatch=CLOCKPRO&tisearch=Search-EN

Does it support CDCE813-Q1?

Best Regards,
Yaita / Japan disty

  • CDCE813-Q1 is an automotive qual spin-off with special prop delay spec and EEPROM image derived from the parent device CDCE913-Q1.  So you can just use CDCE913 profile to program CDCE813-Q1.

    Regards,

    Alan

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.