This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

LMX2572: The output is fixed frequency when configuring in automatic ramp mode

Prodigy 230 points

Replies: 5

Views: 315

Part Number: LMX2572

I am using LMX2572 for sweeping frequency from 2500 MHz to 2590 MHz. For that Iam using divide by 2 at output which is converting VCO frequency from 5000 MHz to 5180 MHz.

 HexRegisterValues2572.txt

The above configuration I am using. However I am getting a fixed end frequency i.e. 2590 MHz. I am not getting a sweep pattern. Is my settings OK?

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.