This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

LMK05318: May I know the I2C protocol on this chip is belong to START/STOP mode or Repeated START mode?

Prodigy 50 points

Replies: 2

Views: 83

Part Number: LMK05318

I'm wondering which I2C protocol is belong to this chip? And which offset I can do the R/W by SW command to verify or BUS is workable.

  • Hello,

    This ticket has been assigned. We'll get back to you soon.

    Regards,

    Hao

  • In reply to Hao Z:

    HEllo,

    The LMK05318 does support repeated start command. Please see figure 58 and section 9.5.2 in the datsheet.

    There is also capability for block read and write as describe in seciton 9.5.2.1

    Regards,

    Liam Keese

    Clock and Timing Systems & Applications


    To design your own Clock Tree solution, visit WEBENCH Clock Architect ​​​​

    More information Clock and Timing System products: http://www.ti.com/clock-and-timing/overview.html

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.