• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 20 subscribers
  • Views 131 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Clock Tree Architect

Hirotaka Matsumoto
Guru 27525 points

Hi all

Would you mind if we ask Clock Tree Architect?


On "User preferred devices" tab, there is OR/AND filter criteria. 
We understand OR filter.

However, we could not understand "AND will map each entry to a stage (neglecting order) in the clock tree."



What case is "AND" filter used for?

Kind regards,

Hirotaka Matsumoto

  • +1
    TI__Genius 11900 points

    Hello Matsumoto-san,

    "AND will map each entry to a stage (neglecting order) in the clock tree."

    If you enter two devices and use "AND" function, then the both devices will be used in the clock tree in different stages. That is, one device will be routed to the other.

    The order in which you enter the devices does not matter.

    Thanks,

    Vibhu