The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK00338: No output (troubleshooting)

Part Number: LMK00338

My LMK00338 design is not producing an output signal on any of the outputs.  I am enclosing a snapshot of my schematic along with a scope-shot of the input signal (I captured one leg of a differential input). Both voltage rails (3V3_CLK and 3V3) measure 3.3V. Please advise on what might be the issue.