This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCE72010: CDCE72010

Part Number: CDCE72010

I plan to drive PRI_REF with LVCMOS signal, meaning grounding the PRI_REF- with 1kOhm resistor as recommended in the datasheet.

However, I'm not sure what is the level of the signal that I should configure for PRI_REF+ while PRI_REF- is grounded?

The datasheet only shows the level for PRI_REF in differential mode but not the level for PRI_REF configured as LVCMOS.

Please help.