This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK01010: How to use LVDS to drive LMK01010 input. LMK61E2 as ClokIn LVDS

Part Number: LMK01010
Other Parts Discussed in Thread: LMK61E2, LMK01000, LMK02000

Good Morning / Afternoon,

thanks for your time and support until now.

I have some problem with the datasheet of LMK01010.

From the datasheet is difficult to clearly understand if LMK01010 has already an internal bias or not. From the general presentation at page 20 of it appears so but the termination is placed "incorrectly", at least according figure 6 of (even assuming internal bias).

Incorrect for LVDS, Fig 13

Correct for LVDS, FIG 6

Which one of the figures is correct for LVDS Input of LMK01010?

If the bias is not internally given by LMK01010, could I use Figures 4 or 5 of

Please not that

do not answer to my question.


Could I use LMK61E2 as input clock?


Thanks for your time