LMX2430: Default value of R0~R5 registers

Shota Mago

Part Number: LMX2430
Other Parts Discussed in Thread: CODELOADER, LMX2594

Hi team,

My customer will use LMX2430 for their application but there is no description about default value of R0~R5 registers in datasheet.

Could you please provide that?

Best regards,

Shota Mago

over 3 years ago

0 Ajeet Pal over 3 years ago

TI__Genius 12560 points

Hi Shota-san,

LMX2430 datasheet section 9.6 shows the Register map details and description for each registers.

For required register settings, use the codeloader tool and configure the synthesizer for required setting, which will set the register and ready to load the device.

Follow the LMX2430EVM user guide for more details.

Regards,
Ajeet Pal

0 Shota Mago over 3 years ago in reply to Ajeet Pal

TI__Expert 7960 points

Hi Ajeet-san,

Thanks for your quick reply. As you mentioned, section 9.6 shows Register map and description. However, I can't find reset or default value for each registers. For example, in case of LMX2594, its register map shows "Reset" for each registers.

Could you please provide reset(default value) of the registers if you have?

Best regards,

Shota Mago

+1 Noel Fung over 3 years ago in reply to Shota Mago

TI__Guru** 102680 points

Hi Mago-san,

The LMX2430 is a 20 years old product, we don't have any record showing the RESET values. Furthermore, there is no device reset bit in the register map.

0 Shota Mago over 3 years ago in reply to Noel Fung

TI__Expert 7960 points

Hi Noel-san,

I understood. Thanks for quick response and clarification!

Best regards,

Shota Mago

Clock & timing

Clock & timing forum

LMX2430: Default value of R0~R5 registers