• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 20 subscribers
  • Views 204 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TICSPRO-SW: TICSPRO-SW using LMK05318

Hirotaka Matsumoto
Guru 27525 points
Part Number: TICSPRO-SW
Other Parts Discussed in Thread: LMK05318

Hi all

Would you mind if we ask TICSPRO-SW using LMK05318?

Our customer doesn't use SEC_REF, they use only PRI_REF.


In this case of SEC_REF=0, with Run Script, there is the error message.



Could you let us know how to set SEC_REF disable?

Kind regards,

Hirotaka Matsumoto

  • +1
    TI__Mastermind 28960 points

    Hello Matsumoto-san,

    The auto-select priority for SEC_REF is set to "Reserved" which is an invalid value. Please set to "not available for selection" instead.

    Because the DPLL has the possibility of manual mode selection for the input reference, our validator takes SEC_REF frequency into account even if SEC_REF is not used. Please enter the same frequency for PRI_REF and SEC_REF, even if SEC_REF is unused; the DPLL calculations will not be affected.

    Regards,

    Derek Payne