Does the LMX2594EVM have to be connected to a PC for standard operation? Our desired use case is to program the evaluation module, disconnect it, and then deploy it. It can be reconnected and configured at a later time if anything requires updating.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Does the LMX2594EVM have to be connected to a PC for standard operation? Our desired use case is to program the evaluation module, disconnect it, and then deploy it. It can be reconnected and configured at a later time if anything requires updating.
Hi Trent,
In the hardware, the CE pin is being pulled-high by a on-board resistor. When power supply is applied to the board, the chip will be enabled.
As a result, after programming, we can remove the ribbon cable and the chip will keep operation.