This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCE949PERF-EVM: Cannot Program

Part Number: CDCE949PERF-EVM
Other Parts Discussed in Thread: CDCE949, CLOCKPRO

I just purchased the cdce949perf-evm for a customer. According to the user guide, it is plug'n'play with the Clock Pro Software. I did read on other posts, that I need to first press 'Skip' to get to the main design screen and then I am able to program the board. However, I never receive the Green connection LED on the GUI. The quick start mentions drivers for the board, but I did not see where those are located, and the user guide mentions a CD, which we did not receive.

Can you point me to the correct drivers for the PERF board, not the PROGRAMMING board?