Hello, what is the maximum data rate supported by the LMK04832-SP for the SPI interface and CLKOUTX outputs when implemented as LVDS? Any help appreciated. Thank you.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello, what is the maximum data rate supported by the LMK04832-SP for the SPI interface and CLKOUTX outputs when implemented as LVDS? Any help appreciated. Thank you.
Hi Jack,
Apologies for the lengthy delay. Based on my data, it looks like LVDS can usually get up to about 800MHz before the output bandwidth begins to roll off signal amplitude. I would recommend using HSDS output formats above 800MHz, as the HSDS outputs will begin to approach LVDS levels at higher frequencies.
Regards,
Derek Payne