Other Parts Discussed in Thread: CLOCKPRO
KMM customers need support for the following problems when debugging CDCE925. Could you provide them? Thank you!
When the customer uses the ClockPro GUI to configure VCXO functionality, the output does not vary with the Vctrl voltage.
24Mhz input, output three frequencies: 12.288m, 3.072m, 0.048m, VCXO mode, the output frequency can be offset with the Vctrl voltage change.
Configure the parameters in ClockPro GUI and send the configuration file to the customer for comparison.Or provide a file that is configured to adjust the output with Vctrl.