Hi team,
Is it not necessary to connect to I2C when using this device in its default configuration?
If not, please tell me about the pin handling.
Sincerely.
Ryu
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Is it not necessary to connect to I2C when using this device in its default configuration?
If not, please tell me about the pin handling.
Sincerely.
Ryu
Hi Ryu,
if you want to use CDCE913 in the default configuration I2C is not needed. SDA/SCL pin can be left floating (there is an internal weak pull up).
regards,
Julian