• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 198 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCE925: inverted output

Liu Yang
Expert 6665 points
Part Number: CDCE925
Other Parts Discussed in Thread: LMK00304, LMK1D1204, CDCDB400, CDCE706, CDCE6214, CDCE18005

Hi Team,

For the CDCE925PWR chip, is it possible to have Y2 be an inverted Y1 signal, (likewise can Y5 be the inverted Y4 output).

If it cannot make inverted outputs, is there a chip that converts single ended input to differential outputs at 50MHz?

Best Regards,

Tom Liu

  • +1
    TI__Mastermind 20900 points

    Hi Tom,

    CDCE925 can only invert the outputs in groups.

    If you just want to convert a single ended clock into a differential clock, you can use any of our differential buffers. They accept S/E inputs. For example: LMK1D1204, CDCDB400, LMK00304, CDCVLP1102....

    If you need a differential Cmos signal you could use CDCE6214, CDCE706, CDCE18005.

    regards,

    Julian