This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCI6214: LVCMOS input clock

Part Number: CDCI6214

Dear, Support Team.

Our customer uses the input clock of CDCI6214 with LVCMOS.
When the input clock is LVCMOS, are the FB_N and REFP/N input pins open?

Best Regards,
Hiroaki Yuyama

  • Hi Hiroaki, 

    When using an LVCMOS crystal input on the CDCI6214, only the XOUT/FB_P pin is used and the FB_N and REFP\N pins can be left floating. I've attached a recommended schematic for reference. If you are using a non-crystal LVCMOS source, then REFP can be used instead. Also, note that bit 15 of the INPUT0 register will need to be set to 0 to enable LVCMOS inputs. 



  • Hi, Connor-san,
    Thank you for your kind reply.

    I was able to understand the LVCMOS input pin states and register settings.

    Best Regards,
    Hiroaki Yuyama