Other Parts Discussed in Thread: LMK5B33216
We have the LMK5C33216 on our custom board connected to XO @ 20 MHz. I am attaching the TICS Pro file.
When we load the registers to the device, we get 156.25 MHz in all outputs except Out10 that is 3x higher (468.75)
The readback registers have the values they are supposed to have.
The same behavior for this output happens when I pick different frequencies, ZDM, have PLL activated etc .
The freq is measured using counters inside the FPGA.
What registers can I read to get the actual frequency . Anything strange that you see in TICS pro file?
Thanks so much!