• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 22 subscribers
  • Views 205 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2572LPEVM: Is it possible to save a new .tcs file with PLLATINUMSIM-SW?(PLLATINUMSIM-SWで.tcsファイルに新規保存することは出来ますか？)

ishii.takeshi
Prodigy 80 points
Part Number: LMX2572LPEVM 
I want to check the design of PLLATINUMSIM-SW with LMX2572LPEVM.
LMX2572LPEVM is controlled by TICSPRO-SW.
TICSPRO-SW requires a .tcs file.
However, I couldn't find a way to save the PLLATINUMSIM-SW design to a new .tcs file.
I believe the attachment is how to add to an existing .tcs file.

(PLLATINUMSIM-SWの設計を、LMX2572LPEVMで確認したい。
LMX2572LPEVMはTICSPRO-SWで制御します。
TICSPRO-SWには.tcsファイルが必要です。
しかしPLLATINUMSIM-SWの設計を.tcsファイルに新規保存する方法を見つけられませんでした。
添付資料は、既存の.tcsファイルに追加する方法だと思います。)
  • 0
    TI__Genius 9680 points

    Hello,

    I believe the "Interface with TICSPro --> Add Filter to TICSPro File" function is supposed to modify an existing .tcs file by appending the PLLatnium filter information to it. I don't think it is possible to create a new .tcs file because PLLatinum does not handle the configuration and register information that TICS Pro works with. A possible workaround is to create a copy of an existing .tcs file and then add the filter to it.

    Best,

    Evan Su

  • 0 in reply to Evan Su
    TI__Guru* 81550 points

    Hi There,

    Click Interface with TICSPro --> Load TICSPro File will load the .tcs configuration file that was generated from TICS Pro. After loading this file to PLL Sim, the configuration (such as N-divider, output frequency, charge pump current, etc) in PLL Sim will be identical to TICS Pro. 

    Click Interface with TICSPro --> Add Filter to TICSPro File will add the loop filter information to a .tcs file. You will see additional script at the end of the .tcs file.

    Unfortunately, I've just found out that this function is not working, maybe you are seeing the same problem.

    Attached exe file has this issue fixed, please download it and replace the original exe file in C:\Program Files (x86)\Texas Instruments\PLLatinumSim

    change the extension from .exe1 to .exe.

    TIPLLatinumSim.exe1

  • +1 in reply to Evan Su
    Prodigy 80 points 
    Hello
Clear and concise explanation, easy to understand. Thank you very much.
  • 0 in reply to Noel Fung
    Prodigy 80 points

    Hello

    With the modified version, I was able to confirm the operation as advised. Thank you very much.