This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPL5010: Is it possible to keep the RSTn low forever when Missed Done signal ?

Part Number: TPL5010
Other Parts Discussed in Thread: TPS3852

Can I set something so that I can get the blue color result that I shows in the following picture ?

Is the TPL5010 can meet my requirement ? Or can you suggest another part that can help me to achieve this ? 

Thank you so much!

Regards

Ken

  • Hi Ken,

    Unless we do a manual reset and keep the reset signal HIGH (at DELAY/M_RST pin), otherwise RSTn will not stay LOW forever. 

    In your application, do you need watchdog or timer or both?

  • Hi Noel,

    Thank you for your reply.

    I am not sure it is call watchdog or timer.

    I need a component (maybe TPL5010) to monitor the MCU. The MCU will provide a pulse (Done signal) every 5 mins.

    It's output will keep high (or Hi-Z) for normal operation. The output will goes Low (until it's power Off and On) when missed Done signal for MCU.

    Could you please suggest a component for me ?

    Thank you so much!

  • Hi Ken,

    You need a supervisor device, please make a post to the Power Management forum, you can use TPS3852 in the post to ensure your post will route to the power management forum correctly.