This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCI6214: CDCI6214 loading time from EEPROM page on startup

Part Number: CDCI6214

Hi , 

we are using the CDCI6214 clock generator for creating a 100 MHz differential AC coupled LVDS clock. 

We have programmed the EEPROM page 1  with the necessary configurations for the required clock and the clock output is properly generated with the configurations from the EEPROM.

For design purpose we need to understand the time required for the CDCI6214 device to have stable output from power up sequence in this pre configured mode. Please  comment on this