This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCE6214-Q1: CDCE6214-Q1: Buying product with preloaded custom eeprom configuration..

Part Number: CDCE6214-Q1


I’m assisting John with this project going forward.  We are releasing prototype documentation for about 100 development boards as part of our current contract.  We have a few questions:

  • What will the custom part number be for the programmed component?  Do you have any requirements or suggestions as to how we call it out in our documentation?
  • How are the parts going to marked / identified after programming?
  • For potential future production contracts, is there a preferred method to programming these components off board (i.e. socketed test board, etc.)?

You can have your sales and marketing team contact my email ( for more information.


  • Jennifer,

    - Custom part number varies per EEPROM configuration. I will be forwarding your email to our sales and marketing team and can further discuss this topic there.

    - The parts will have a top marking with the custom part number.

    - TI does not have a socketed board for programming this device. The devices can be soldered onto an EVM or your own board for programming. Alternatively, some companies choose to use a third party programming house to perform the EEPROM programming. 

    Thank you,