This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCLVP111-SP: Output to LMX2694-SEP correct AC coupled termination

Part Number: CDCLVP111-SP
Other Parts Discussed in Thread: LMX2694-SEP

LMX2694 datasheet calls for AC termination on the input, with the caps on the receiver side of the termination resistors. The recommended termination resistors on the driver side are 150 Ohm per figure 7b in the CDCLVP111-SP datasheet, but in this figure, the AC coupling caps are on the driver side of the transmission line. Below I have my initial thoughts on how to terminate each side, but I wanted to double check that this will work as intended, since the figures don't exactly match.