This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPL5010-Q1: RSTn logic output high-level undefined from datasheet

Part Number: TPL5010-Q1


also in my application the IC power supply is 3.3V and I would like to pull the RSTn pin to +5V.
The datasheet reports that the "input voltage at any pin" must be less than VDD+0.3V and it seems to include also the RSTn pin (even if it is an open-drain output).

Are we really sure that there is no issue if RSTn is pulled to 5V while VDD is only 3.3V?

Best regards,