Hello! I would like to communicate with my CDCM6208V1EVM via I2C from a microcontroller eval board (Tiva TM4C123G Launchpad). Is there a way to connect the SDA/SCL lines directly? Thanks! City
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello! I would like to communicate with my CDCM6208V1EVM via I2C from a microcontroller eval board (Tiva TM4C123G Launchpad). Is there a way to connect the SDA/SCL lines directly? Thanks! City
Hi Cynthia,
Refer to Page 14 in the User Guide: See JMP9 -> Connects an external host to SPI or I2C. The switch needs to be disengaged.
Regards
Arvind Sridhar