• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 19 subscribers
  • Views 307 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2430 - Register writing order

Ryuji
Guru 20090 points

Hello,

(1)
Are there any order to writing the register ?
For example, R0 => R1 => R2 => R3 => R4=> R5

(2)
Are there any timing requirement between writing the register address ?
For example, should we wait the time for writing between R0 and R1?

Best Regards,
Ryuji Asaka

  • 0
    TI__Mastermind 27581 points

    Ryuji,

    For this device, the order is not critical.

    For our devices with integrated VCO, the order can matter as the action of programming registers can trigger different events (like activating the VCO calibration).  However, for this PLL, there are no actions triggered by programming of registers.

     

    Regards,
    Dean