This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PLL evaluation module LMX2487E-EVM - connecting to a computer for CodeLoader control

Other Parts Discussed in Thread: CODELOADER, USB2ANY, LMX2487E-EVM

I am trying to program an LMX2487E-EVM using CodeLoader software, but I cannot find the USB2ANY hardware anywhere.  So instead, I'm trying to directly connect the uWire port on the board to my parallel port, pin by pin.  So far, I don't know if it's working, as nothing has changed on the board and it doesn't seem to respond (it has power) - it could be something wrong with the computer, but I just don't know.

Any suggestions on how to get this board programmed?