• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 709 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Audio Clock generation from Video Clock

Ritesh Parekh
Prodigy 100 points

Other Parts Discussed in Thread: CDCE913, CDCEL913, LMH1983, CDCVF25084, TS5A63157

Hello,

In one of my application I am looking for generation of Audio Clock frequency of 24.576MHz from Video clock. The Video Clock can be 27MHz to 148.5MHz. I would like to know if there any TI Clock & Timings devices suggested for this application.

Regards,

Ritesh

  • 0
    TI__Mastermind 20900 points
    Hello Ritesh,

    CDCE913 or CDCEL913 could do the job.

    regards,
    Julian
  • 0 in reply to Julian Hagedorn
    Prodigy 100 points

    Thanks Julian. In case of CDCE913, I hope there will not be ppm errors in case of any of the input frequencies, 148.5MHz, 148.5MHz,/1.001, 74.25MHz, 74.25MHz,/1.001 and 27MHz.

    Also I am looking for the following,

    1. fixed clock multipliers x2, x4 with input clock frequency of 3.072MHz. Are these available in TI portfolio.

    2. zero delay 1:2 buffers and a switch or clock mux for the Video clock. I need to route the video clock coming from 2 sources to CDCE913. So I am thinking of 1:2 zero delay clock buffer and a clock switch or Mux. Are these available in TI portfolio.

    Regards,

    Ritesh

  • 0 in reply to Ritesh Parekh
    TI__Genius 9920 points
    Hi Ritesh,
    1, For 24.576MHz clock generator, could you consider LMH1983 in your system? It is a powerful device.
    2, For multiplier for 3.072MHz & zero-delay buffer, TI has X4 device CDCVF25084. It is 1:8 zero-delay buffer. That's easy to get divider by 2 from CPLD/logic.
    3, For mux, analog switch TS5A63157 could be a choice.

    Regards,
    Shawn