This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ClockPro generated setup for CDCE913

Hi, All

I'm using Clock Pro to generate setup below.

Y1=27Mhz, Y2=27MHz, Y3=24.576MHz.

but the generated set up is for Y1=27MHz, Y2=24.576MHz, Y3=27Mhz.

(manually, I can set Y1=27Mhz, Y2=27MHz, Y3=24.576MHz.)

I'd like to know if there is any limitation on frequency selection.


generate setup

Best regards,