Hi,
By setting SYNCN_SW OFF on the GUI and SYNCEN of PLL OFF, you can check the CLK output even if GPIO 0 on the evaluation board is OPEN.
Is there any inconvenience if I use it under such conditions?
Regards,
ACGUY
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
By setting SYNCN_SW OFF on the GUI and SYNCEN of PLL OFF, you can check the CLK output even if GPIO 0 on the evaluation board is OPEN.
Is there any inconvenience if I use it under such conditions?
Regards,
ACGUY