Other Parts Discussed in Thread: TPL5000, , TPL5110, TPL5010
I am using TPL5100 as a watchdog. I have configured D0,D1,D2 as high so I have 1024s timer. Currently, my application is sending DONE pulse (High->Low) every 20 seconds and I expect after 1024 sec, it will not set RSTn pin. In my case, irrespective of DONE signal, after 1024s out HW is getting reseted due to TPL5100.
Can you provide more details how we can implement watchdog using TPL5100.
Update: We have TPL5000 as well and with the same implementation, we are not seeing reset signal and watchdog functionality works fine with it.
So what needs to be change for TPL5100?