• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 272 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LMK01000: Additive Jitter at 50 MHz

LMK01000: Delay Noise Floor Information

archer01
Prodigy 30 points
Part Number: LMK01000

In the "CLKout DELAYS" section of the LMK01000 datasheet it states "When the delay is enabled it adds to the output noise floor".  The same section states "Refer to the Typical Performance Characteristics plots for the Delay Noise Floor information."  However, there are no such plots in the datasheet.  Is this information available elsewhere?  Thank you.

  • 0
    TI__Mastermind 18070 points

    Hi Kurt,

    I didn't find the typical performance plots in the datasheet either. They are somehow missing in the published version. I submitted a ticket to fix this issue. Meanwhile, I'm attaching three plots that I found in the database: delay noise floor and output noise floor with LVDS and LVPECAL format. I hope that this helps.

    Images.zip

    Regards,

    Hao