CDCLVP2102: CDCLVP2102: Unused Output pins ? Bypass thr' Capacitor to GND ? or not

Dilip Namdeo Mohol

Intellectual 1570 points

Part Number: CDCLVP2102

CDCLVP2102 :- Unused output pins can be kept floating ? or need to bypass thr' 10pf Capacitor

over 5 years ago

0 Rob Rodrigues over 5 years ago

TI__Mastermind 19780 points

Hi Dilip,

Unused output pins can be left floating.

Best Regards,

0 Dilip Namdeo Mohol over 5 years ago in reply to Rob Rodrigues

TI__Intellectual 1570 points

Can CDCLVP2102 buffer is hotswap capable on a live backplane ? The input clock to the device is from the backplane connector and can be inserted on a live backplane.If not hotswap compatible , will a series 0.1uf cap on the input clocks to IN0+ and IN1+ will be good to use.

0 Rob Rodrigues over 5 years ago in reply to Dilip Namdeo Mohol

TI__Mastermind 19780 points

Hi Dilip,

Will the design of the PCB that the buffer is on allow the VDD to the buffer be applied before a connection is made to the input clocks of the buffer?

Thanks,

Clock & timing

Clock & timing forum

CDCLVP2102: CDCLVP2102: Unused Output pins ? Bypass thr' Capacitor to GND ? or not